Titanium Grade 5 Sheets & Plates Manufacturer and Supplier in India

HOME → Titanium Products → Titanium Grade 1

When the requirement is for a material that is strong, light, highly corrosion resistant, and a suitable choice for metal working, then Titanium Grade 5 (Ti-6Al-4V) Sheets & Plates are a viable option. Sachin Steel Centre offers these sheets and plates either hot-rolled or cold-rolled, as per ASTM B265/AMS/ASME SB265/BS standard and UNS R56400 standard. Size, thickness, width and length are available as per project specifications. Other Grade 5 material requirements include Titanium Grade 5 Circles & Discs and other material also. Inspection report, mechanical test and hardness test and PMI are available for checking the sheets and plates as required, and MTC can be provided as required. Also available for custom cutting, for accurate sizing and easier fabrication.

Table Of Content

Specifications of Titanium Gr 5 Sheets and Plates
Dimensions Chart of Titanium Grade 5 Sheets & Plates
Frequently Asked Questions

Technical Data

Specifications of Titanium Gr 5 Sheets and Plates

Specification Attribute	Details
Standard Specification	ASTM B265 / ASME SB265
Sheet Thickness	0.008" to 0.125" (0.2mm to 3.175mm)
Plate Thickness	0.125" to 5.00" (3.175mm to 127mm)
Coil Thickness	0.3mm to 120mm
Sheet / Plate Width	1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc.
Sheet / Plate Length	2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc.
Coil Length	Custom per customer requirement
Plate / Sheet Nominal Size	15NB to 150NB
Product Forms	Sheets, Plates, Coils, Strips, Circle, Ring, Disc, Foils
Heat Treatment / Condition	Annealed, Solution Treated & Aged (STA), Beta Annealed, Stress Relieved
Typical Hardness Range	30–39 HRC (300–360 HB)
Value-Added Services	Cladding, Heat Treatment, Annealing, Pickling, Rolling, Cutting, Bending, Forging, Minor Fabrication, etc.

Dimensions Chart of Titanium Grade 5 Sheets & Plates

Form / Process	Surface Finish Condition	Available Thickness (Gauge/mm)	Max Standard Width	Applicable Standard
Cold Rolled Sheet	Descaled / Pickled (Cleaned)	0.5mmto4.0mm (24to9Gauge)	1219mm(48") / 1500mm(60")	ASTM B265 / AMS 4911
Hot Rolled Plate	Annealed & Descaled / Sandblasted	5.0mmto50.0mm	1500mm(60") / 2000mm(79")	ASTM B265 / ASME SB265
Precision Strip / Foil	Bright Annealed / Cold Rolled	0.1mmto0.5mm	300mmto600mm	ASTM B265
Polished Sheet	Mechanical Polish (180–400 Grit)	1.0mmto6.0mm	1250mm(49")	Per Customer Spec

Frequently Asked Questions

What is ASTM B265 Titanium Grade 5 Sheet?

ASTM B265 is the standard for titanium and titanium alloy sheet, strip, and plate. Grade 5 sheet is made from Ti-6Al-4V and meets specified chemical, mechanical, and dimensional requirements.

What is the difference between Titanium Grade 5 Sheet and Plate?

The main difference is thickness. Sheets are generally thinner and easier to form, while plates are thicker and mainly used where greater structural strength is required.

What thicknesses are available for Titanium Grade 5 Sheets & Plates?

Titanium Grade 5 Sheets & Plates are available in various thicknesses, commonly from around 0.3 mm to 100 mm or more, depending on the required specification and manufacturing capability.

Are Titanium Grade 5 Sheets & Plates corrosion resistant?

Yes. Titanium Grade 5 offers excellent corrosion resistance due to the stable protective oxide layer that forms naturally on its surface.

What finishes are available for Titanium Grade 5 Sheets & Plates?

Common finishes include hot rolled, cold rolled, pickled, polished, 2B, 2D, and BA finishes, depending on the required specification.

What is the weight of Titanium Grade 5 Plate per square metre?

The approximate weight can be calculated using its density of 4.43 g/cm³. For example, a 10 mm thick Grade 5 plate weighs approximately 44.3 kg/m².